BW Technologies MicroClip XT Spécifications télécharger pdf (Page 56)

GasAlertMicroClip XT

Calibration

Verification

1. After calibration is complete and the detector returns to

normal operation, verify the calibration using a gas cylin-

der other than the one used for calibration.

2. The gas concentration should not exceed the sensor's

detection range. Confirm the LCD shows the expected

concentration.

3. To ensure the readings are accurate, apply the verifica-

tion gas for the same amount of time as was applied to

the sensor when it was calibrated.

Example: H

S span time 2 minutes therefore, apply verification

gas for 2 minutes.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 73 74

Pas de commentaire

BW Technologies MicroClip XT Spécifications Page 56