BW Technologies MicroClip XT Spécifications télécharger pdf (Page 31)

GasAlertMicroClip XT

Technical Reference Guide

Figure 3. Connecting the IR Link

1. Activate the detector and wait for the startup tests to

complete.

2. Connect the USB cable to the USB port on the computer.

3. Connect the USB cable to the IR Link.

4. Insert the IR link onto the IR interface on the back of the

detector.

5. Open Fleet Manager II and access the Sensors tab.

Refer to Installing Fleet Manager II

6. From the Sensors tab, click Retrieve from Device at the

bottom of the window.

The fields will populate with the detector’s current configurations.

7. Refer to the descriptions in the following sections to

define settings and enable/disable options:

•

Detector Identification

• Sensor Configuration (CO, O

, H

S, and LEL)

•

User Options

• Language Menu

8. When configuration of new settings is complete, click

Save to Device at the bottom of the window. The detec-

tor automatically updates with the new settings.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 73 74

Pas de commentaire

BW Technologies MicroClip XT Spécifications Page 31