BW Technologies MicroClip XT Manuel de l'opérateur télécharger pdf (Page 7)

GasAlertMicroClip XT

Pushbuttons

Pushbutton Description

• To activate the detector, press C.

• To deactivate the detector, press and hold C until the OFF countdown is complete and the LCD

deactivates.

• To view the TWA, STEL, and MAX (maximum) readings, press C twice. To clear the TWA, STEL,

and MAX readings, press C when the LCD displays RESET.

• To initiate calibration, deactivate the detector. Press and hold C while the detector performs the

OFF countdown. Continue holding C while the LCD briefly deactivates and then begins the CAL

countdown. Release C when the CAL countdown is complete.

• To activate the backlight while in normal operation, press C.

• To acknowledge latched alarms, press C.

• To acknowledge a low alarm and disable the audible alarm, press C (if the Low Alarm Acknowl-

edge option is enabled).

1 2 3 4 5 6 7 8 9 10 11 12 ... 22 23

Pas de commentaire

BW Technologies MicroClip XT Manuel de l'opérateur Page 7