BW Technologies MicroClip XT Manuel de l'opérateur

1, 2, 3, and 4-Gas DetectorOperator’s Manual

GasAlertMicroClip XTOperator’s Manual8Attach the Gas Cylinder to the Detector

GasAlertMicroClip XTBump Test9Bump Test

GasAlertMicroClip XTOperator’s Manual10AlarmsRefer to the following table for information about alarms and corresponding screens. If Stealth mode is e

GasAlertMicroClip XTAlarms11Alarm Display Alarm DisplaySensor Alarm• During startupError [sensor name] displays• During normal operationErr displaysCo

GasAlertMicroClip XTOperator’s Manual12User Options MenuTo modify the user options, connect the detector to the IR Link adapter and open Fleet Manager

GasAlertMicroClip XTCharging the Detector13• Low Alarm Acknowledge: When enabled, the audible alarm can be disabled during a low alarm. The vibrator,

GasAlertMicroClip XTOperator’s Manual14To charge the battery, complete the following:1. Deactivate the detector. Insert the charging adapter plug into

GasAlertMicroClip XTMaintenance15To replace a sensor or sensor filter, refer to the following illustration, table, and procedures.1. Deactivate the de

GasAlertMicroClip XTOperator’s Manual16Replacing the sensor filter1. Note the placement of the PCB to ensure it is replaced correctly. Remove the two

GasAlertMicroClip XTMaintenance17Replacing the oxygen sensorNoteDetectors that are configured for 1, 2, or 3 gases may contain a dummy sensor in one o

Limited Warranty and Limitation LiabilityBW Technologies LP (BW) warrants the product to be free from defects in material and workmanship under normal

GasAlertMicroClip XTOperator’s Manual18• Visually inspect the battery to ensure no damage has occurred.• When replacing the rear shell, ensure the cha

GasAlertMicroClip XTSpecifications19SpecificationsInstrument dimensions: 11.25 x 6.00 x 2.89 cm (4.4 x 2.4 x 1.1 in.)Weight: 170 g (6.0 oz.)Operating

GasAlertMicroClip XTOperator’s Manual20period, low alarm acknowledge, IntelliFlash, confidence beep, and IntelliFlash intervalBattery operating time:

iERP: 131474-L3D6567/0 [English]© BW Technologies 2010. All rights reserved.

1GasAlertMicroClip XTIntroductionThe operator’s manual provides basic information for the GasAlertMicroClip XT. For complete operating instructions, r

GasAlertMicroClip XTOperator’s Manual2• Calibrate the detector before first-time use and then on a regular schedule, depending on use and sensor expos

GasAlertMicroClip XTParts of the GasAlertMicroClip XT3Parts of the GasAlertMicroClip XTItem Description1 IntelliFlash2 Visual alarm indicators (LEDs)3

GasAlertMicroClip XTOperator’s Manual4Display Elements18765432Item Description1 Alarm condition2 Automatically zero sensor3 Numeric value4 Stealth mod

GasAlertMicroClip XTPushbuttons5PushbuttonsPushbutton DescriptionC• To activate the detector, press C.• To deactivate the detector, press and hold C u

GasAlertMicroClip XTOperator’s Manual6Sensor Poisons and ContaminantsSeveral cleaners, solvents, and lubricants can contaminate and cause permanent da

GasAlertMicroClip XTCalibration7CalibrationProcedure Display Procedure Displaya CautionCalibrate only in a safe area that is free of hazardous gas in