BW Technologies MicroClip XT Manuel télécharger pdf (Page 19)

GasAlertMicroClip

Maintenance

2. Connect the charging adapter to the detector IR

interface.

3. Charge the battery.

4. Charge the battery after each workday.

Maintenance

To maintain the detector in good operating condition, perform

the following basic maintenance as required.

• Calibrate, bump test, and inspect the detector on a regular

schedule.

• Maintain an operations log of all maintenance, bump tests,

calibrations, and alarm events.

• Clean the exterior with a soft damp cloth. Do not use

solvents, soaps, or polishes.

Replacing a Sensor or Sensor Filter

a Warning

To avoid personal injury, use only sensors specifically

designed for the detector.

Use proper ESD handling practices.

Caution

Ensure hands are clean or wear gloves before handling

components.

To replace a sensor or sensor filter, refer to the following

illustration, table, and procedures.

Item Description

1 Detector

2 IR and charger interface

3 Charging adapter

4 USB Cable

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Pas de commentaire

BW Technologies MicroClip XT Manuel Page 19